3-in-1 Equipment Savings Estimator

See how consolidating to one JGM Squeezing Dryer impacts your facility and operating costs.

Based on typical film recycling line configurations. Actual savings vary by facility layout, material mix, and maintenance practices. Contact KITECH for a site-specific assessment.

Your Line Parameters

kg/h — wet plastic entering the drying section

Hours/day (typical recycling line: 16–22 h)

Days/year (typical: 280–330 days)

Estimated Annual Throughput —
2
Machines Eliminated
From 3 separate units (press + spin dryer + thermal dryer) down to 1 JGM unit
~15 m²
Floor Space Freed
Typical 3-machine layout (~23 m²) vs single JGM footprint (~8 m²)
3 → 1
Maintenance Schedules
One unified service program replaces three separate machine maintenance plans
—
Est. Annual Maint. Hours Saved
Calculated from your annual operating hours and typical service intervals
Before (Centrifugal System)
Dewatering press machine
Centrifugal spin dryer
Thermal / hot-air dryer
3× conveyors / transfer points
3× maintenance contracts
10–15% residual moisture
After (JGM Squeezing Dryer)
1× JGM unit — full drying section
Direct output — no transfer conveyors
—
—
1× unified maintenance schedule
3–5% final moisture (pellet-ready)
Ready to verify these numbers for your line?
Our engineers will review your exact layout and provide a formal savings assessment.
Calculate Your Exact Savings